VENDING MACHINES - WHAT WE HAVE TO OFFER?
For over a decade we have been repairing the electronic cards for the Vending machines. In that time we have turned over and restored the functionality of several thousand cards for nearly three hundreds individual clients from Poland and abroad. Having that huge experience allow us instant and accurate troubleshooting. Yet, in the post-repair procedure, the cards are tested in a real vending machines. In our workshop we successfully repair electronics unit from many kinds of a vending machines (spring, coffee, disc, canned and bottled).
Each of the conducted repair is covered with 12 month warranty period. Due to this fact, there are several factors, that have to be met:
- we have to physically have the real vending machine in our workshop in order to conduct diagnosis. On a regular basis we have nearly every model of Necta & Wittenborg, some of FAS, Vendo and perhaps some other brands as well. You may want to drop us a message to confirm prior shipping.
- Your cards have not been altered by other workshops. Situations, in which we collect a card in a very bad shape, with further damage done by unprofessionals raises the problem of covering the repair under our warranty. Or course, that is not a problem if somebody had to replace a backup battery on his own. Any electronic cards altered by 3rd party are a subject of our evaluation and we may refuse the repair and return back the card to its respective owner. In such a case You will not be charged any costs except for return shipping.
- prior shipping us the card, please inspect them for signs of corrosion (backup battery leaks, machines used outdoor, an old equipment). If there are signs of corrosion it means finding the spot where the corrosion broke the integrity of the connection is a very time consuming job, and yet, right after it may pop-out in another place. They are considered unreliable and repairing them doesn't make sense.
ALL WITH FLAT PRICE...
In general, for the repair of a CPU/Actuation card we charge amount of abt. 90EUR. We decided to give up photocell repairs, because there's too much hassle with it and offer the quality replacements instead.
Given prices are estimated. It very rarely happens, that the repair cost will go beyond this value, but if it does - You will be informed and prior the repair, we will be looking forward Your acceptance.
... AND FAST
Standard, estimated time of the repair in our workshop is up to 5 working days.
PREPARE THE PARCEL...
Whenever You wish to send us Your cards for the repair make sure:
- You put a visible information on the parcel or the shipping label, that these cards are for the repair. That tells the person managing the parcel to whom it has to be forwarded. Otherwise, the parcel will stuck at the reception desk until Your contact.
- label each card describing the malfunction (i.e. doesn't start, no communication, lack of control to this or that). That malfunction is a subject of our diagnosis in process of locating the culprit and the post-repair check. Similar like with a car - You don't visit Your shop asking "Yo, fix my ride guys", but tell the symptoms.
- also, please provide invoicing/delivery information
...AND IT SHIP TO:
All 4 Vending
Inwestycyjna 2
26-600 Radom, Poland
This actuation card can be found in the following Necta vending machines Necta Kikko, Kikko Max, Kikko RY, Oblo, Astro, Kobalto, Konvivio, Brio 3.
Typical problems:
- lack of control of a mixer/dispenser
- doesn't detect the waste container switch
- missing control over valves
You will find more details on how to use our workshop by clicking at this link.
Actuation card from a Necta Opera vending machine
Typical malfunctions:
- card doesn't start
- throws error of dosing arm positioning
- doesn't engage a mixer or dispenser
- mixer or dispenser in constant motion
You will find more details on how to use our workshop by clicking at this link.
The cpu card can be found in the following machines of Necta: Sfera, Snakky, Snakky Max, Snakky SL, Mini Snakky, Rondo, Astro, Kikko, Kikko Max, Kikko RY, Oblo, Brio 3, Kobalto, Konvivio.
Typical problems:
- doesn't start and run
- temperature sensing problems
- detects incorrect amount of trays and motors
- spins multiple motors at a time
- display problems
- freezes after photocell test at "Error: no product"
- communication over MDB
You will find more details on how to use our workshop by clicking at this link.
This card (code 6735/454/01) can be found in the machines Necta Starfood and Necta Zenith.
Typical problems:
- doesn't start
- missing communication with coin mechanism
- messed information on display
You will find more details on how to use our workshop by clicking at this link.