VNX-A module compatible with VELUX® KMG100 window actuator drive, that allows easy interfacing to any intelligent building installation, such as. KNX , LCN, LOXONE, MODBUS, etc.
The control of the module is very simple and uses a pair of wires only. Depending on the applied power polarity, the VNX-A module closes or opens the window. The motion of the drive is constantly supervised by the module, which automatically switches off the drive after detection of the end position. This solution enables integration with any chosen intelligent building system - our module has already proven itself in such systems as KNX, LCN, Loxone or MODBUS.
This product comply with IEC 63044-3 standard.
Warranty period: 24 months
LEGAL DISCLAIMER
Any alteration made to the VELUX® products using our units voids VELUX® warranty. You are asked to remove the CE-marking from the modified VELUX® product, as when modified, it is no longer in force. Removing the rain sensor creates a risk of water damage. Your installation has to be protected against unexpected movement and provide a safety against entrapment and meet other requirements in accordance with applicable regulations.
VELUX®, io-homecontrol® are a registered trademarks and belong to their respective owners,
Installation manual
